USER MANUAL
SPEED DOME CAMERA SD-A27IR
Page:
27
Page:
27
DSE srl - Italy - WWW.DSE.EU
Linear Scan
The linear scan is the continuous horizontal movement (PAN) from right to left between two
preset limit. This camera allows you to store up to 20 linear scan.
•
SCAN NUMBER - Select the number of the linear scan (1 to 20)
•
START PRESET A- Defines the first preset to be used as limit switches.
•
END PRESET B - Defines the second preset to be used as limit switches. It 'good to
set two preset with the same level of tilt as the movement is only horizontally.
•
SCAN SPEED - The speed of rotation (Options: FAST, MEDIUM, SLOW)
•
PARK TIME - Once reached a preset limit is possible to program a residence time
before starting the movement in the reverse direction (Options: 1 sec./ 3 sec./ 6
sec./ 15 sec./ 30 sec./ 1 min , / 5 min./ 15 min./ 30 min./ 1 hour / 8 hours / 12 hours /
24 hours)
•
SCAN DIRECTION - Sets the direction of the first shift at the start of the scan (from
A to B or vice versa)
•
START - Starts the linear scan
Pattern
This camera is able to record a sequence of operations performed by the user, such as
displacements,
zoom etc. for them
rerun
automatically. These stored sequences are defined PATTERN. The camera allows you to
record each pattern 4 by the maximum duration of 10 minutes and with a number of
operations not exceeding 500.
•
PATTERN NUMBER - The number of the pattern to be programmed (1 to 4)
•
START PATTERN - Start the stored pattern
•
PROGRAM PATTERN - Press IRIS + and the camera will start to store all user
operations performed. To the
end of
Press IRIS + path to stop
there
recording.
•
CLEAR PATTERN - Delete the stored pattern
Clock