USER MANUAL
SPEED DOME CAMERA SD-A27IR
Page:
10
Page:
10
DSE srl - Italy - WWW.DSE.EU
mechanical assembly
The speed dome cameras SD-A can be installed for exterior wall and ceiling with the aid of
SD-AST2 / 3 brackets that must be ordered separately.
In the pictures that follow the example of installing the wall bracket
Fasten the wall bracket by plugs, taking care to leave the cable outlet at the center
between the fixing holes.
The connecting cables pass through the bracket
Connect the camera and fasten it to the bracket with the supplied screws.
Mounting console
The movement control of the speed dome cameras is done through the RS485 serial port
sending commands using a special console or via a VCR.
The control devices are connected along the bus 485, such as cameras and do not require
addressing. E ', however, essential that the protocol used and the speed are the same as the
one set in the cameras. Refer to the manual of the console or VCR for programming.