USER MANUAL
SPEED DOME CAMERA SD-A27IR
Page:
25
Page:
25
DSE srl - Italy - WWW.DSE.EU
achievement of the vertical of 90 °. If you continue to impart to the camera of a
vertical movement command and it responded normally the image would appear
upside down there. For this does not happen in reality. The camera come in
correspondence with the 90 ° stops. The alternative to the arrest and autoflip
function thanks to which the camera, arrived in correspondence of 90 °
accomplishes an automatic 180 ° rotazaione on itself and can continue to follow the
operator's command on
side
opposite always providing an image straight. (Options: ON / OFF)
•
PROPORTIONAL REDUCE - E '
the function that
It slows down the displacement of the tilt speed proportional to the level of the zoom
lens. This is to prevent the movement with high levels of zoom
too much
rapid
tilt
prevent proper aiming.
•
PRESET FREEZE FRAME - Not available
•
MOUNTING STYLE - This option, also called MIRROR, allows to flip the image
horizontally to allow to have a good understanding even when the recovery takes
place in the opposite direction to the observer in rear view. (Options: FORWARD /
REVERSE)
•
September SOFT ADDRESS - E 'can set up a software address for the camera that
replaces the one set with micriinterruttori. Press FOCUS + to RESET SOFT
ADDRESS and set the software address to be assigned. Then press FOCUS + to
ENABLE SOFT ADDRESS. From the moment the camera will only be operated with
the new address. Disabling SOFT ADDRESS actual return address set with DIP
switches on board room.
•
September AZIMUTH ZERO - The camera can display overlays the horizontal angle
of the camera refers to the geographic north. Here you can point the camera toward
the north is set this point as AZIMUTH ZERO.
•
September PRIVACY MASK - Not available on this model
Motion setting
This section contains all the programming for the automatic movement of the camera. To
avoid misunderstandings in the reading of this part of the manual appropriate first to clarify
that for these cameras, there are 5 types of automatic movements:
•
PRESET
- The presets are preset camera positions characterized by a precise value
PRESET
- The presets are preset camera positions characterized by a precise value
of X / Y coordinates, zoom and focus. You can also call
Easily keyboard
if necessary.
•
PATROL
- Also called or CRUISE TOUR. It means the automatic movement of the
PATROL
- Also called or CRUISE TOUR. It means the automatic movement of the
camera between presets with a residence time on each of them programmable.
•
SCAN
- Yes
SCAN
- Yes
It means the continuous movement of
horizontal 360 ° rotation
•
LINEAR SCAN
- Yes
LINEAR SCAN
- Yes
It means the movement
continuous RIGHT-LEFT between two end positions
•
PATTERN
- Similar to the TOUR. The camera, however, does not follow in
PATTERN
- Similar to the TOUR. The camera, however, does not follow in
sequence the various presets, but a custom continuous movement recorded by the
user in the programming phase.
Presets
This section allows you to set the camera presets via the programming menu, although this
is also possible via the controls
from
keyboard
such as
already
described
previously. The camera can manage 255 presets, but being the presets from 49 to 99
reserved for functions
of
system
remain programmable
to
the user 204 presets.