USER MANUAL
SPEED DOME CAMERAS SD-xxx-5
Page:6
WWW.DSE.EU
Select the video format AHD
CVI TVI CVBS
This cameras support AHD technology with 5MP
resolution
AHD technology is the latest evolution in analogue
CCTV. These AHD cameras, combined with the latest
generation AHD video recorders, provide megapixel
resolution, without latency, while maintaining all the
simplicity of installation of an analog system. In order
to use the AHD 5MP video signal you need a VCR that
supports this technology and this resolution.
If your DVR supports AHD 5MP there is no need to
change the video format of the camera. If not you can
change the video format of the camera to CVI, TVI or
even CVBS which is traditional analog video.
It is possible to switch by calling up the following
presets twice consecutively:
CVBS
Call preset 140 twice
AHD
Call preset 137 twice
TVI
Call preset 138 twice
CVI
Call preset 139 twice
ATTENTION - These control presets only work with
RS485 protocol, they do not work with UTC control on
video cables.
As an alternative to the signal switching presets it is
possible to switch the video signals in the camera OSD
menu which opens by calling preset 102 twice. In the
camera OSD menu it is also possible to change the
video resolution of the camera.
The camera OSD menu is explained later in the
manual.
Wall mounting
The SD series speed dome cameras are supplied with a
wall mount bracket. The camera cable in this case must
pass through the bracket. In the following photographs
the example of installation of the wall bracket
Fix the bracket to the wall using plugs, taking care
to leave the cables exit in the center between the fixing
holes.
The connecting cables pass through the bracket
Connect the camera and secure it to the bracket
with the supplied screws.