USER MANUAL
SPEED DOME CAMERAS SD-xxx-5
Page:12
WWW.DSE.EU
System
This menu item provides all information about the
camera. This is an information-only panel where
nothing can be set.
CAMERA - Camera module.
PROTOCOL - Supported RS485 protocol
DOME ID - Address of the camera on the RS485
BUS.
COMM - Settings of the communication protocol
used on the RS-485 bus
VERSION - Product version
Dome
This section contains all general adjustments of the
speed dome camera
COMM - Here you set the communication protocol
data such as, protocol, bitrate and address. We
described this section at the beginning of the
manual.
IR DISPLAY - Here you can set some parameters
on the illuminator MODE = IR on, off and
automatic
TESTING TIME = Short time means fast day /
night switching, long time safer
OUTPUT POWER = It is possible to reduce the IR
power if the shots are close together
ILLUMINATION ON - It is the activation threshold
of the LEDs on a scale from 0 to 15
AMBIENT LIGHT - Measure the ambient light in
real time when you enter the OSD menu. It is not
a settable parameter.
IR SWITCH ZOOM - This is the zoom level (1 to
10) at which the camera switches from near IR to
far IR.
GUARD TOURS - Here you set the tours, i.e. the
automatic movements between different presets.
The camera manages 3 tours.
GUARD TOUR - Select tour 1,2 or 3
SETTING - For each position of the tour it is
possible to define: Preset, Dwell time and speed.
Each tour can contain up to 16 locations.
INIT - restore default tours
CALL - Starts the selected tour
DELETE - Clears all presets of the selected tour
AB SCAN - It means the continuous RIGHT-LEFT
movement between 2 limit switch positions.
PRESET A - Sets the A limit switch
PRESET B - Sets the B limit switch
SCAN SPEED - Sets the speed of the scan
DWELL TIME - Dwell time on each limit switch (2-
60 sec.)
PAN SCAN - This refers to the 360 ° panoramic
scan
PAN SCAN SPEED - Sets the speed of rotation
INIT - restore default parameters
CALL - Starts panoramic scan
PARK ACTION - This section allows you to set the
main function that the camera will automatically
return to after a certain time of absence of
commands from the operator
PARK MODE - A tour, 360 scan or AB scan can be
set as the main action. You can also choose
ACTION to recall the last automatic movement
previously recalled, or HOME to recall a specific
position that you set later.
PARK TIME - Sets the time of inactivity after
which the main action is called.
SETTING - Here you can set the HOME position
which is recalled if the HOME mode has been set
above. Position the shot and call Preset 1 to save.
CALL - Recalls the main action set DELETE -
Clears all settings in this section
PRIVACY ZONE - Not available
ADVANCED - Here are some additional
adjustments
PWR ON ACTION - You set the action that the
camera automatically performs at startup. It can
be a scan or a tour, or the main action set in the
PARK ACTION section, or you can set MEMORY to
recall the last action performed before the power
failure.
RATIO SPEED - Enables automatic speed
reduction as zoom is increased
AUTOFLIP - It must be enabled if during the
vertical movement (TILT) you want the camera,
having reached the vertical position, to rotate 180