background image

 

Document: RY-BCC8FDL 2A0 

 

Page: 4 

OWNER'S MANUAL

 

  RY-BCC8FDL IP camera license plate

 

 

DSE srl - Digital Surveillance Equipment - WWW.DSE.EU 

 

In practice this adjustment affects the opening time of 
the shutter according to the following table: 
 
METHOD ' 

SHUTTER (sec) 

1 1/100 
2 1/240 
3 1/480 
4 1/960 
5 1/2000 
6 1/4000 
 
The NORMAL option should not be used because it is the 
natural vision camera with automatic shutter that is 
excellent for classical surveillance but does not allow the 
license plate reading. 
 
AMBIENT BRIGHTNESS 
This regulation defines the brightness of the surrounding 
environment. Setting the LOW value has a very dark 

shooting where almost only the license plate will be 
visible. In this condition we obtain the maximum 
protection against the glare due to headlights. 
The midle and HIGH settings allow you to see better the 
means but not optimal position situations can better 
endure the glare of the headlights. 
In practice this adjustment affects the camera gain in 
accordance with the following table: 
 
BRIGHTNESS GAIN 

(dB) 

low 6 
Middle 12 
High 18 
 
The NORMAL option should not be used because it is the 
natural vision of AGC with automatic camera that is 
excellent for classical surveillance but does not allow the 
license plate reading. 

 

Содержание RY-BCC8FDL

Страница 1: ...s not exceed this distance otherwise the illumination of the LEDs will not be effective The second thing to consider is to position the camera so that the light of the headlights is not directly oriented towards the camera while maintaining an angle of approximately 30 with respect to the illumination of the headlights It s also wise to install the camera in position detected above street level fr...

Страница 2: ...lank It will see the image of the camera If you re testing the camera in an internal do not worry if the picture will become dark And normal considering that these cameras work with a fixed shutter Through the IE browser you can also adjust certain parameters of the camera by pressing the SETTINGS button at the top CAUTION To avoid prejudicing the ANPR functionality and should not modify the camer...

Страница 3: ...to the camera Normally there is no need to change the power of LED lighting but if the plate is read at close range may notice the license plate too bleached In this case it may be necessary to reduce the power of the LEDs To change the power of the LEDs you must click on the UP and DOWN buttons on the camera control Clicking again on these buttons you can visually control the power of the LEDs is...

Страница 4: ...regulation defines the brightness of the surrounding environment Setting the LOW value has a very dark shooting where almost only the license plate will be visible In this condition we obtain the maximum protection against the glare due to headlights The midle and HIGH settings allow you to see better the means but not optimal position situations can better endure the glare of the headlights In pr...

Отзывы: