Viewing The Instrument Pages
26
Part No. 057-129 DSE871x mono remote display ISSUE 2.1 21/09/2010 ADM
4.6.3 GENERATOR
Contains electrical values of the generator (alternator), measured or derived from the module’s voltage and current
inputs.
•
Generator Voltage (ph-N)
•
Generator Voltage (ph-ph)
•
Generator Frequency
•
Generator Current
•
Generator Earth Current
•
Generator Load (kW)
•
Generator Load (kVA)
•
Generator Power Factor
•
Generator Load (kVAr)
•
Generator Load (kWh, kVAh, kVArh)
•
Generator Phase Sequence
•
Synchroscope display
4.6.4 BUS
Contains electrical values of the common generator bus measured or derived from the module’s bus inputs.
•
Bus Voltage (ph-N)
•
Bus Voltage (ph-ph)
•
Bus Frequency
•
Bus Phase Sequence
4.6.5 SYNCHROSCOPE DISPLAY
When synchronising is in progress, the synchroscope display automatically appears. Alternatively it can be scrolled
to manually and found in the Generator (DSE8711) or Mains (DSE8716) instrumentation page.
Voltage difference
between the two
supplies.
= the V or Hz is within
configurable limits.
/
= Above or below limits
Frequency difference
between the two
supplies.
Phase of the two supplies. 0
°
/
360
°
is the centre of the
display. -180
°
/ +180
°
is at the
edge of the display.
The configured acceptable
phase check window is shown
by the green arrows.
The green bars appear when
the phase is within these limits.
kW and KVAr Loading of
the generator.
CALL US TODAY
1-888-POWER-58
REQUEST A QUOTE
SHOP ONLINE
www.genpowerusa.com
