DSE DSE7210, Руководство оператора, Страница: 127 / 160

DIMENSIONS AND MOUNTING
For flat surface mounting in a Type 1 enclosure to meet UL requirements
DIMENSIONS
240.0mm x 181.1mm x 41.7mm (9.4” x 7.1” x 1.6”)
PANEL CUTOUT :
220mm x 160mm (8.7” x 6.3”)
ADJUSTABLE PARAMETERS (Configuration editor)
Section Parameter as shown on display Factory Settings
DISPLAY Contrast
0%
Language
English
LCD Page Timer
0h 0m 0s
Auto Scroll Delay 0h 0m 0s
Current Date and time hh:mm
EDITOR Alt Config Default Config
ENGINE Oil Pressure Low Shutdown 0.00bar
Oil Pressure Low Pre Alarm 0.00bar
Coolant Temperature Low Warning 0ºC (if configured)
Coolant Temperature High Pre Alarm 0ºC
Coolant Temperature High Shutdown
0ºC
Start Delay Off Load
0h 0m 0s
Start Delay On Load 0h 0m 0s
Start Delay Mains Fail
0h 0m 0s
Start Delay Telemetry
0h 0m 0s
Pre Heat Timer
0h 0m 0s
Crank Duration Timer 0m 0s
Crank Rest Timer
0m 0s
Safety On Delay
0m 0s
Smoke Limiting 0m 0s
Smoke Limiting Off 0m 0s
Warm Up Timer 0m 0s
Cool Down Time 0h 0m 0s
Engine Under Speed Shutdown Active / Inactive
Engine Under Speed Shutdown 0 rpm
Engine Under Speed Warning Active / Inactive
Engine Under Speed Warning
0 rpm
Engine Over Speed Warning
Active / Inactive
Engine Over Speed Warning
0 rpm
Engine Over Speed Shutdown
0 rpm
Engine Speed Overshoot Delay
0m 0s
Engine Speed Overshoot
0%
Fail To Stop Delay 0m 0s
Battery Under Voltage Warning Active / Inactive
Battery Under voltage Warning Delay 0h 0m 0s
Battery Under Voltage 0 V
Battery Over Voltage Warning Active / Inactive
Battery Over Voltage Warning Delay 0h 0m 0s
Battery Over Voltage Warning 0 V
Charge Alternator Failure Warning Active / Inactive
Charge Alternator Failure Warning
0 V
Charge Alternator Warning Delay 0h 0m 0s
Charge Alternator Failure Shutdown
Active / Inactive
Charge Alternator Failure Shutdown
0.0 V
Charge Alternator Shutdown Delay
0h 0m 0s
DPTC Auto Regeneration Inhibit
Active / Inactive
Fuel Usage Alarm (Running Rate)
0% - 100%
Fuel Usage Alarm (Stopped Rate)
0% - 100%
Droop control
Active / Inactive
Droop control
0%
GENERATOR Generator Under Voltage Shutdown 0 V
Generator Under Voltage Pre Alarm 0 V
Generator Nominal Voltage 0 V
Generator Over Voltage Pre Alarm 0 V
Generator Over Voltage Shutdown 0 V
Generator Under Frequency Shutdown 0 Hz
Generator Under Frequency Pre Alarm
0 Hz
Generator Nominal Frequency
0 Hz
Generator Over Frequency Pre Alarm
0 Hz
Generator Over Frequency Shutdown
0 Hz
Full Load Rating
0 A (If Configured)
KW Overload Trip
0%
Delayed Over Current Active / Inactive
Delayed Over Current 0%
AC System 3 Phase, 4 Wire
CT Primary
0 A
CT Secondary
0 A
Generator transient delay
0s
ACCESSING THE ‘RUNNING’ CONFIGURATION EDITOR
• The ‘running’ editor can be entered while the engine is running. All protections remain active if the
•
engine is running while the running editor is entered.
•
Press and hold the button to enter the running editor.
EDITING A PARAMETER
• Enter the editor as described above.
• Press the left or right buttons to cycle to the section you wish to view/change.
• Press the up or down buttons to select the parameter you wish to view/change within the currently
selected section.
• To edit the parameter, press to enter edit mode. The parameter begins to flash to indicate that
you are editing the value.
•
Press the up or down buttons to change the parameter to the required value.
•
Press to save the value. The parameter ceases flashing to indicate that it has been saved.
• To exit the editor at any time, press and hold the button.
ADJUSTABLE PARAMETERS (Running editor)
Section Parameter as shown on display Factory Settings
DISPLAY Contrast
0%
Language
English
ENGINE Manual Frequency Trim
0.0Hz
Droop Inactive / Active
Droop 0%
DPTC Auto Regen Inhibit Inactive / Active
DPTC Manual Regen Inactive / Active
Front Panel Configuration Editor (continued)
Section Parameter as shown on display Factory Settings
TIMERS LCD Page Timer 0h 0m 0s
Auto Scroll Delay 0h 0m 0s
Pre Heat Timer 0m 0s
Crank Duration Timer 0m 0s
Crank Rest Timer
0m 0s
Safety On Delay 0m 0s
Smoke Limiting
0m 0s
Smoke Limiting Off
0m 0s
Warm Up Timer
0h 0m 0s
Cool Down Timer
0h 0m 0s
Speed Overshoot Delay
0m 0s
Fail To Stop Delay
0m 0s
Battery voltage Low Warning Delay 0h 0m 0s
Battery Voltage High Warning Delay 0h 0m 0s
Return Delay 0h 0m 0s
Generator Transient Delay 0s
Mains Transient Delay 0m 0s
Mains Transfer Time 0.0s
SCHEDULE Schedule Active / Inactive
Schedule On Load Active / Inactive (only available when Scheduler is active)
Schedule Period
Weekly, Monthly, (only available when Scheduler is active
Schedule time and Date Selection (1-16)
Press to begin editing then up or down when selecting the
different parameters in the scheduler.