DSC PC51O2-433NA Скачать руководство пользователя страница 22

LIMITED WARRANTY

Digital Security Controls Ltd. warrants the original purchaser
that for a period of twelve months from the date of purchase,
the product shall be free of defects in materials and
workmanship under normal use. During the warranty period,
Digital Security Controls Ltd. shall, at its option, repair or
replace any defective product upon return of the product to
its factory, at no charge for labour and materials. Any re-
placement and/or repaired parts are warranted for the remain-
der of the original warranty or ninety (90) days, whichever is
longer. The original owner must promptly notify Digital
Security Controls Ltd. in writing that there is defect in mate-
rial or workmanship, such written notice to be received in all
events prior to expiration of the warranty period.

International Warranty

The warranty for international customers is the same as
for any customer within Canada and the United States,
with the exception that Digital Security Controls Ltd. shall
not be responsible for any customs fees, taxes, or VAT
that may be due.

Warranty Procedure

To obtain service under this warranty, please return the
item(s) in question to the point of purchase. All authorized
distributors and dealers have a warranty program.

Conditions to Void Warranty

This warranty applies only to defects in parts and work-
manship relating to normal use. It does not cover:
• damage incurred in shipping or handling;

• damage caused by disaster such as fire, flood, wind, earth-

quake or lightning;

• damage due to causes beyond the control of Digital

Security Controls Ltd. such as excessive voltage, me-
chanical shock or water damage;

• damage caused by unauthorized attachment, alterations,

modifications or foreign objects;

• damage caused by peripherals (unless such peripherals

were supplied by Digital Security Controls Ltd.);

• defects caused by failure to provide a suitable installa-

tion environment for the products;

• damage caused by  use of the products for purposes other

than those for which it was designed;

• damage from improper maintenance;

• damage arising out of any other abuse, mishandling or

improper application of the products.

Digital Security Controls Ltd.’s liability for failure to repair
the product under this warranty after a reasonable number
of attempts will be limited to a replacement of the product,
as the exclusive remedy for breach of warranty. Under no
circumstances shall Digital Security Controls Ltd. be li-
able for any special, incidental, or consequential damages
based upon breach of warranty, breach of contract, negli-
gence, strict liability, or any other legal theory. Such dam-
ages include, but are not limited to, loss of profits, loss of
the product or any associated equipment, cost of capital,
cost of substitute or replacement equipment, facilities or
services, down time, purchaser’s time, the claims of third
parties, including customers, and injury to property.

Disclaimer of Warranties

This warranty contains the entire warranty and shall
be in lieu of any and all other warranties, whether
expressed or implied (including all implied warran-
ties of merchantability or fitness for a particular pur-
pose) And of all other obligations or liabilities on the
part of Digital Security Controls Ltd. Digital Secu-
rity Controls Ltd. neither assumes responsibility for
nor authorizes any other person purporting to act on
its behalf to modify or to change this warranty, nor
to assume for it any other warranty or liability con-
cerning this product.

This disclaimer of warranties and limited warranty
are governed by the laws of the province of Ontario,
Canada.

WARNING: Digital Security Controls Ltd. recom-
mends that the entire system be completely tested on a
regular basis. However, despite frequent testing, and
due to, but not limited to, criminal tampering or elec-
trical disruption, it is possible for this product to fail
to perform as expected.

Содержание PC51O2-433NA

























Отзывы: