DSC PC5008 Скачать руководство пользователя страница 1

1

T

hank you for purchasing the PC5132-RS Wireless Receiver. This product

is the result of several years of development and will allow you to connect
up to 8 wireless detection devices to the PC585, PC1565, PC5008 and

up to 32 detection devices to the PC5010 and PC5015.

The PC5132-RS uses 900 MHz, spread spectrum technology, which provides
several advantages:

• supervisory transmissions are sent every 12 minutes, as opposed to every

50-60 minutes

• programmable supervisory window can be as little as 1 hour, or as long as

24 hours

• devices use standard alkaline batteries as opposed to specialized

batteries

• orthogonal antenna arrangement for better RF reception

Version 3.0 of this product introduces 

two new features

:

6 digit serial numbers for all wireless devices:

  These new serial

numbers include hexadecimal digits.  

Please read  Section 3.1 “A note on

Electronic Serial Numbers (ESN)” for more information on enrolling older 5-
digit and newer 6-digit devices.

Identification of Wireless Keys (WLS909):

 Wireless keys 1 to 16 can now

be identified as access codes 17 to 32 (respectively) for identified
openings/closings and command output activation.  This feature is only
supported on the following control panels:  PC5010 v2.1, PC5015 v2.2,
PC5008 v2.1, PC1565 v2.1 and PC585 v2.1 or higher. 

For more information

regarding this feature, see Section 3.4 “Identified Wireless Keys.”

We are confident you will find the PC5132-RS Wireless Receiver a unique and
useful control panel enhancement.

Содержание PC5008

































Отзывы: