[804][841] Motion Cameras
To program motion cameras:
1.
Enter Installer Programming section [804][841].
2.
Select one of the following options by scrolling or entering the hotkey:
[001] VisualVerification
On: Alarms trigger image capture from PIR Cameras
Off: Alarms do not trigger image capture from PIR Cam-
eras
[002] ViewTime Win-
dow
01 Alarm + 5 Minutes
02 Alarm + 15 minutes
03 Alarm + 1 Hour
[003] ViewOther Alarms 01 Fire key enabled/disabled
02 Duress enabled/disabled
03 Medical key enabled/disabled
04 Panic key enabled/disabled
[804][901]-[905] Delete Wireless Devices
To delete wireless devices:
1.
Enter Installer Programming section [804] then select one of the following sub-sections:
[901] – Delete wireless zone devices
[902] – Delete wireless key
[903] – Delete sirens
[904] – Delete repeaters
[905] – Delete keypads
2.
Select a device to delete using the scroll keys or go directly to a specific device by entering
a hotkey.
3.
Press [*] to delete or [#] to exit.
[804][921]-[925] Replace Wireless Devices
To replace a wireless device:
1.
Enter Installer Programming section [804] then select one of the following sub-sections:
[921] – Replace wireless zone devices
[922] – Replace wireless key
[923] – Replace sirens
[924] – Replace repeaters
[925] – Replace keypads
2.
Press [*] to select a sub-section. The first available device is displayed.
3.
Select a device to replace using the scroll keys or go to a specific device by entering a
hotkey.
4.
Press [*]. When prompted, activate the device (full enrollment) or enter the device ID (pre-
enrollment). A message is displayed confirming enrollment.
[804][990][001 – 005] Show All Devices
Use this section to review wireless devices enrolled on the system and to view serial numbers associated
with each device.
To review wireless device information:
- 10 -
firealarmresources.com
