24
Section [390]
LINKS Preamble:
- [392]
Program sections 390 to 392 with preambles (if necessary) for each communicator
outbound telephone number.
Section [490]
LINKS Downloading Preamble:
If necessary, program section 490 with the LINKS Preamble for the Downloading.
Section [703]
Dialling Delay:
Program section 703 with 010. This places a necessary delay between LINKS (and all
other) dial attempts.
Sur-Gard DC1664LC
The Sur-Gard DC1664LC control panel must be equipped with software version 3.60 or later and the SG-MEX2
module.
Mode 20, Address [B1~F0]: Zone Definitions for Zones 1-64
Program the zone(s) that will be used as LINKS1000 supervisory zone(s) as type “0”, 24-hour silent
Mode 21, Address [00]: System Options
Turn ON Option 35 to enable control of the LINKS1000.
Mode 27, Address [00~04]: LINKS1000 Preamble Codes for phone number 1~5
Program the LINKS1000 Preamble codes for each telephone number, if needed, using trailing hexadecimal
“F” for any unused digits. (Contact your cellular provider for the correct dialing sequence.)
Mode 27, Address [05]: LINKS1000 Preamble code for downloading telephone number
Program the LINKS1000 preamble for the downloading telephone number, if needed, using trailing
hexadecimal “F” for any unused digits. (Contact your cellular provider for the correct dialing sequence.) If
downloading is not being used, program all locations as hexadecimal “F”.
Mode 27, Address [06]: Test Transmission Code and Forced Answer Zone
First Two Digits: Program a 2-digit reporting code to enable the Cellular Test Transmission. Note that the
regular Test Transmission must also be enabled for the Cellular Test Transmission to operate.
Second Two Digits: Program a number from 01 through 64 for the zone to be used for the Forced Answer
function. Any zone from 01 through 64 may be used; program “00” if the Forced Answer feature is not required.
Sur-Gard P16LC
The Sur-Gard P16LC control panel must be equipped with software version 2.0 or later.
Mode 22, Address [008]: System Options
Turn ON option 59 (toggle bit 3) to enable operation with the LINKS1000.
Mode 22, Address [037]: Programmable Output 3 Definition
Program PGM3 as type 37 for LINKS1000/2000 control
Mode 20, Address [101]-[116]: Zone Definitions
Program the zone(s) being used for LINKS1000 Supervisory as Type “0”, 24-hour silent.
Mode 20, Address [025]-[030]: LINKS1000 Preamble Codes
If needed, program these locations with the LINKS1000 preamble code. (Check with your cellular provider
for correct dialing sequence.) Program all unused digits as trailing hexadecimal “F”.
Mode 20, Address [744]: LINKS1000 Event Description and Test Transmission Code
Program a three digit reporting code to enable the LINKS1000 Test Transmission Code. If the LINKS1000 Test
Transmission is not being used, program this location as “00”.
Mode 22, Address [066]: Forced Answer Zone
Program the two-digit number of the zone being used as the forced answer zone. If the Forced Answer feature
is not being used, program this location as “00”.
