Beam Patterns for Lenses BV-L1 to BV-L4
Locating the Detector
Select a detector location that will provide the coverage required keeping in mind the
following potential problems.
• Do not aim the detector at
reflective surfaces
such as mirrors or windows as this
may distort the coverage pattern or reflect sunlight directly onto the detector.
• Avoid locations that are subject to direct high
air flow
such as near an air duct out-
let.
• Do not locate the detector near sources of
moisture
(steam or oil).
• Do not aim the detector such that it will receive direct or reflected (mirror)
sunlight
.
• Do not limit the coverage by large
obstructions
within the detection area such as
plants or filing cabinets.
• When using BV-L4 (Pet Alley lens): Do not aim the detector at a stairway which a pet
has access to. Do not place furniture or objects higher than 3 ft/0.9 m, which a pet
can climb onto (e.g. a cat on a couch), closer than 6 ft/1.8 m to the detector.
Device Wiring
To connect the AMB-300, consult the wiring diagram below:
