- XII -
3) ERROR
- ERR-01----SETTING-UP MORE THAN 1/10000 (1 SCALE VALUE/TOTAL WEIGHT)
- ERR-02----THE SCALE-WEIGHT-SETTING-UP VALUE IS LAGER THAN THE
SETTING-UP VALUE OF TOTAL WEIGHT.
- ERR-03----THESCALE-WEIGHT-SETTING-UP VALUE IS SMALLER THAN 80% OF
TOTAL-WEIGHT SETTING-UP VALUE.
- ERR-04----THE MOTION OF WEIGHT OCCURS IN THE CALCULATION OF
CONSTANT VALUE.
- ERR-05----THE SPAN IS LARGE. (TURN ON SPAN-ADJUSTING DIP S/W 7 OR 8.)
- ERR-06----THE SPAN IS SMALL. (TURN ON SPAN-ADJUSTING DIP S/W 7 OR 8.)
- ERR-07----IT IS OUT OF THE SCOPE OF DATA IN SETUP.
IF THE ERRO OCCURS, IT INDICATES THE OCCURRENCE NUMBER OF EACH
ERRORFOR 3 SECONDS, AND THEN IS REVERTED TO THE STATE
BEFORE THE OCCURRENCE OF ERROR, AND THEREFORE IS INPUT AGAIN.
* NOTE) IN CASE THE CALIBRATION IS STOPPED BY THE POWER FAILURE OR
THE ERROR DURING THE ACTING OF CALIBRATION, THE ABNORMAL STATE CAN
BE DONE IN THE NORMAL STATE, AND THEREFORE YOU ARE KINDLY
REQUESTED TO CONFIRM IT.
