- VII -
(1) SETUP-SETTING
WHEN “CLR” IS PRESSED ON S&C MODE, THE INDICATOR SHOWS "F01-XX".
“F” ON THE INDICATOR IS THE ABBREVIATION OF FUNCTION OF SETUP
MODE, AND THE NUMBER OF FURTHER 2 FIGURE, SHOWS THE FUNCTION NUMBER.
THE NUMBER OF THE LAST 2 FIGURE SHOWS THE SETTING - UP OF
FUNCTION ON THE RELEVANT F.N. AS THE NUMBER, AND THEN IN THE CHANGE,
IT CAN BE INPUT AS THE NUMBER.
- SETTING-UP METHOD
THE NUMBER OF FUNCTION DESIRABLE IS INPUT WITH THE NUMERICAL KEY,
AND THEN “CLR” KEY IS PRESSED.
THE CURRENTLY-SET-UP VALUE IS INDICATED IN THE LAST 2 FIGURE,
AND THE NUMBER, WHICH INTENDS TO BE CHANGED, IS INPUT, AND THEN
“SET/CAL” KEY IS PRESSED.
IF SO, IT IS MEMORIZED TO THE DEVICE-INNER-MEMORY.
WHEN “CLR” IS CONTINUSOULY PRESSED, IT IS GONE OVER THE NEXT
FUNCTION NUMBER.
AFTER THE INPUT OF NUMERICAL KEY, ONLY WHEN “SET/CAL”
SURELY PRESSED, THE NEW DATA IS ENTERED INTO THE MEMORY.
WHEN SETUP MODE IS CHANGED OVER S&C MODE, “0” + “CLR” KEY IS PRESSED.
