27
EN
3. Tighten the screws:
Hold the nut
with the spanner and tighten the
screw with the hex key.
It is essen-
tial that you use the tool supplied to
tighten the screws. Self-locking nuts
cannot be tightened by hand.
Step 2: Attaching the Jumping Mat
CAUTION!
■
Before you
fi
t the jumping mat, satisfy yourself that the screws have been securely
tightened. Properly tighten them again if necessary!
Before attaching the jumping mat, please read the instructions in
this section carefully through! Make yourself familiar with the ten-
sioning tool and its use. This makes it easier for you to attach the
jumping mat!
1. First of all, the 3 rope loops with the
yellow spheres are attached to the
frame (A).
2. To do this, pull the rope loops
over
the frame and hook the yellow sphe-
res into the loop.
3. The
fi
rst two loops can be pulled
over the sphere by hand, but for the
third and all other loops we recom-
mend that you use the tensioning
tool, as described in the following
steps. Note: the third rope loop with
a yellow sphere is under heavy ten-
sion but the more rope loops you at-
tach, the easier it gets
.
The instructions continue on the next page! Please turn over.
Hold
Tighten
A
A
A
A
Содержание SP150003
