DS Automobiles DS 5, Руководство пользователя

Страница: 341 / 376

15
Hybrid4 system
Starting the Hybrid4 system
Activation of the Hybrid4 system
On activation of the Hybrid4 system, the
instrument panel lights up, the power indicator
needle is placed at position "
0 ". The steering
column automatically unlocks (perceptible
noise and movement of the steering column).
Depending on certain parameters, such as the
state of charge of the high voltage battery or
the ambient temperature, the Hybrid4 system
itself determines whether it is necessary to
start the HDi Diesel engine.
The mode selector is at the
AUTO position.
In wintry conditions with the
engine cold, the Diesel pre-
heating warning lamp can stay
on for a few seconds; wait until
it goes off before releasing the
brake pedal.
Starting - switching off the Hybrid4 system
Never leave children alone inside the
vehicle when the Hybrid4 system is
active.
) Place the gear selector at position N .
) Insert the electronic key in the reader.
or
) With Keyless Entry and Starting, simply
having the electronic key inside the vehicle
is sufficient.
) Press the brake pedal firmly.
) Make a single short press (about one
second) on the " START/STOP " button.
) Maintain pressure on the brake pedal until
the READY lamp comes on, signalling
activation of the Hybrid4 system, confirmed
by an audible signal.
If the Hybrid4 system does not activate:
) If N is flashing in the instrument
panel, move the gear selector to
position
A then to position N .
) If the " Foot on the brake " is
displayed, press the brake pedal
firmly.
The READY lamp may come on after
a few seconds if there is a demand
for activation of the Hybrid4 system
after energy economy mode has been
entered.