manualshive.com logo in svg

DS Automobiles DS 5, Руководство пользователя

Поделиться
Скачать
DS Automobiles DS 5 Скачать руководство пользователя страница 231

229

Practical information

DS5_en_Chap08_info-pratiques_ed02-2015

General recommendations

Observe the legislation in force in your country.
Ensure that the weight of the towing vehicle is higher than that of the towed vehicle.
The driver must remain at the wheel of the towed vehicle and must have a valid driving 
licence.
When towing a vehicle with all four wheels on the ground, always use an approved towing 
arm; rope and straps are prohibited.
The towing vehicle must move off gently.
When towing a vehicle with the engine off, there is no longer any power assistance for 
braking or steering.
In the following cases, you must always call on a professional recovery service:
-  vehicle broken down on a motorway or fast road,
-  four-wheel drive vehicle,
-  when it is not possible to put the gearbox into neutral, unlock the steering, or release 

the parking brake,

-  towing with only two wheels on the ground,
-  where there is no approved towing arm available...

Towing the vehicle

Access to the tools

The towing eye is stowed in the boot under the 
floor.
To gain access to it:

F

  open the boot,

F

  raise the boot floor,

F

  take out the towing eye, located in the 

storage well.

Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye.

Содержание DS 5

























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды