manualshive.com logo in svg

DS Automobiles DS 5, Руководство пользователя

Поделиться
Скачать
DS Automobiles DS 5 Скачать руководство пользователя страница 201

199

Practical information

DS5_en_Chap08_info-pratiques_ed02-2015

Do not start the compressor before 
connecting the white pipe to the tyre 
valve: the sealant product would be 
expelled through the pipe.

F

  Switch on the compressor by moving 

the switch 

B

 to position 

"I"

 until the tyre 

pressure reaches 2.0 bars.

 

The sealant is injected into the tyre under 
pressure; do not disconnect the pipe from 
the valve during this operation (risk of 
splashing).

F

  Remove the kit and screw the cap back on 

the white pipe.

 

Take care to avoid staining your vehicle 
with traces of fluid. Keep the kit to hand.

F

  Drive immediately for approximately three 

miles (five kilometres), at reduced speed 
(between 15 and 35 mph (20 and 60 km/h)), 
to plug the puncture.

F

  Stop to check the repair and the tyre 

pressure using the kit.

Tyre under-inflation detection

If the vehicle is fitted with tyre under-
inflation detection, the under-inflation 
warning lamp will remain on after the 
wheel has been repaired until the 
system is reinitialised by a CITROËN 
dealer or a qualified workshop.

If after around 5 to 7 minutes the 
pressure is not attained, this indicates 
that the tyre is not repairable; contact 
a CITROËN dealer or a qualified 
workshop for assistance.

Содержание DS 5

























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды