HOT PRESS USERS MANUAL
8
Temperature Controls
A
DJUSTING
THE
T
EMPERATURE
C
ONTROLLER
(F
AHRENHEIT
)
To adjust the pre-set temperature, press and hold
Button 1
. Then use
Button
2
to increase or
22
Button 3
to decrease the pre-set temperature. Once the
Button 3
Button 3
desired level is reached, release Button 1 to set the desired temperature.
When current is fl owing through the heating element, a small red dot next
to
OUT1
will glow. In normal operation, the dot will turn on and off every few
minutes as the controller maintains the glass at the preset temperature.
At the factory, the temperature controller is set to allow a maximum
temperature of 239°F. The factory preset temperature is 194°F.
A
DJUSTING
THE
T
EMPERATURE
C
ONTROLLER
(C
ELSIUS
)
To adjust the preset temperature, press
Button 1
and
L1
will appear for one
second. Then press
Button 3
to increase or
Button 3
Button 3
Button 4
to decrease the preset
temperature. Once the desired level is reached, press
Button 1
to set your
required temperature.
When current is fl owing through the heating element, a small red dot next
to
RL1
will glow. In normal operation, the dot will turn on and off every few
minutes as the controller maintains the glass at the preset temperature.
At the factory, the temperature controller is set to allow a maximum
temperature of 115°C. The factory preset temperature is 90°C.
Should you press Button 4 in error and
HY1
displays, just press Button 1
again.
Do not change the value that follows HY1.
Illustration 8A:
Temperature controller (F)
Illustration 8B:
RL1 dot.
