Druck PV 210, Инструкция по эксплуатации

Страница: 7 / 44

Copyright 2005 Baker Hughes Company.
English–PV 210 Instruction Manual | 3
5. General Specification
6. Returned Goods Procedure
If the unit requires calibration or is unserviceable, return it
to the nearest Druck Service Centre listed at: Druck.com
Contact the Service Department to obtain a Return
Authorization (Worldwide excluding USA).
In the USA, obtain a Return Material Authorization [RMA].
Provide the following information on either a RGA or RMA:
•
Product (i.e. PV 210)
• Serial number
• Details of defect/work to be undertaken
• Operating conditions
6.1 Safety Precautions
You must inform Druck if the product has been in contact
with any hazardous or toxic substance.
The relevant COSHH or in the USA, MSDS, references and
precautions to be taken when handling.
6.2 Approved Service Agents
For the list of service centers:
Druck.com
INFORMATION
Pneumatic gases must be
compatible with stainless steel, bright nickel
plated brass, anodized aluminum, phosphor
bronze, nitrile rubber seals and nylon.
Item Specification
Pneumatic Pressure
Range
0 to 3 bar (0 to 45 psi)
Vacuum Pressure Range 0 to -0.9 bar
a
(0 to -27 inHg)
a
a. This value assumes atmospheric pressure at 1 bar (14.5 psi) and
varies depending on atmospheric pressure.
Relief Valve Adjustable from 50 mbar (20 inH
2
O)
to maximum pressure.
Dimensions (Length x
Width x Depth)
150 mm (6.7”) x 46 mm (1.8”) x 46
mm (1.8”)
Weight (approximate) 0.6 kg (1.3 lb)
INFORMATION
Service by unauthorized
sources will affect the warranty and may not
guarantee further performance.