Dru Excellence 60, Руководство по установке

Страница: 22 / 40

English
I NS TAL L A TIO N M A N U A L
UK
F08
(follow-up)
F12
F13
F14
F15
F16
F17
ESYS is not released
Flame loss when only the
main burner is on
Flame loss if both burners
are on.
No burner device (see "C" in
appendix 3, fig. 38)
High limit error
Hardware Error ESYS
Disable contact is closed
Error messages
Ionization pin
defective (measure
ionization current when 0)
ESYS is in hard-lock
Gas has fallen away
Gas control defective
(see "A" in app. 3, fig. 38)
Suffocation due to poor
flue gas channel
Suffocation when using
PowerVent
24 hour check control
Gas has fallen away
Gas control defective (see "A"
in appendix 3, fig. 38)
Suffocation due to poor flue
gas channel
Suffocation when using
PowerVent
Burner device came loose
from burner device
Burner device incorrectly
mounted
Pins on the connector on the
gas control are bent
High limit bridge defective
ESYS defective (burner
device)
Window is open.
(if this contact is present)
A bridge has been made
across the Disable contact.
Replace the ionization
pin
Wait half hour until ESYS
resets itself.
Check gas supply
Replace the gas control
Check the concentric system
Check the setting of the
appliance
Check the pressure setting
of the PowerVent system
Reset with remote control
(consult Powervent manual)
Check gas supply
Replace the gas control
Check the concentric system
Check the setting of the
appliance
Check the pressure setting of
the PowerVent system
Attach the burner device
Mount the burner device
correctly
Bend them straight
Check High limit bridge ESYS
Replace ESYS (burner device)
Close window
Remove bridge on ESYS
(burner device)
Error code Problem Possible cause Remedy