2
1. INTRODUCTION
1.1 GENERAL INFORMATION
With this manual, we wish to provide you with all the important information for the safety of installation, operation and
maintenance personnel and for the decommissioning of the MINISUMO II pump.
The most recent version can be obtained by requesting it from the Sales Technical Office or online at
http://www.dropsa.com.
This manual, drafted originally in the ITALIAN language, constitutes an integral part of the pump and must be carefully
kept for the entire life of the same.
In the event that the pump is sold, rented or lent for use, it must be delivered to the new user together with the EC
Conformity Declaration.
Carrying out any operation on the pump without first having carefully read and comprehended all the instructions
contained in this manual is prohibited.
The images contained in this manual are purely illustrative and are not binding for the Manufacturer who reserves the
right to make changes to components and/or parts for improvement or other reasons without updating this manual if
these changes have not altered the operation and safety of the pump.
1.2 MANUFACTURER DATA
DropsA S.p.A.
Via Benedetto Croce, 1
20090 – Vimodrone (MI) – ITALY
Ph. +39 02 250 791
Fx. +39 02 250 79 767
E-mail: [email protected]
1.3 Identification label
A yellow is located on the front part of the pump reservoir that indicates the product code and the
basic characteristics.
ATTENTION
Removing or tampering with the identification label is strictly prohibited.
1.4 How to use
For a better understanding of the information provided in this manual, the warnings or instructions
that are considered to be critical or dangerous are highlighted with the following symbols:
DANGER
For instructions that, if not followed, may cause danger.
ATTENTION
For instructions which, if not followed, may cause damage to the pump.
