DROPSA 3905000, Руководство пользователя по эксплуатации и техническому обслуживанию

Страница: 9 / 13

9
9. MAINTENANCE PROCEDURE
The pump was designed and built in order to minimize maintenance requirements.
To simplify maintenance, it is recommended to install it in an easy to reach position.

Periodically check the pipe joints to detect any leaks. Furthermore, always keep the pump clean to be able to quickly detect
any leaks or defects.

Check if the filter is clean after every 2000 hours of operation.
The machine does not require any special equipment for any control and/or maintenance activity. It is recommended to use
tools and personal protective devices suitable for use (gloves) and that are in good condition according to current regulations to
prevent damage to people or machine parts.
In the case of doubts and/or problems that cannot be solved, do not try to discover the reason by disassembling machine parts,
but contact the DROPSA S.p.A technical office.
10. DISPOSAL
During machine maintenance, or if it is demolished, do not dispose of the polluting parts in an improper manner. Refer to the
local regulations for their correct disposal. When demolishing the machine, the identification plate and all other documents
must be destroyed.
11. ORDER INFORMATION
11.1 STANDARD VERSIONS
N.B. The following specifications apply for all models:
Bypass calibration pressure 40 bar (35bar for single-phase motors); Pressure gauge 0 – 100 bar.
ATTENTION :
Make sure that the electric and hydraulic power supplies are disconnected before carrying out any
maintenance work.
ELECTRIC MOTOR FLOW RATE TANK CAPACITY
PART NUMBER
(with optical level
to use oil and fluid
grease)
PART NUMBER
(with float level to
use only oil)
230-400 V 50 Hz three-phase- 0.09 KW 4P
265-460 V 60 Hz three-phase- 0.11 KW 4P
350 CC
3 L 3905000 3905040
6 L 3905001 3905041
500 CC
3 L 3905004 3905044
6 L 3905009 3905049
110 V 50 Hz single phase – 0,.9 KW 4P
350 CC
3 L 3905007 3905047
6 L 3905012 3905052
500 CC
3 L 3905008 3905048
6 L 3905013 3905053
230 V 50 Hz single phase – 0.09 KW 4P
350 CC
3 L 3905005 3905045
6 L 3905010 3905050
500 CC
3 L 3905006 3905046
6 L 3905011 3905051
24V CC
600 CC
3 L 3905002 3905042
6 L 3905003 3905043
850 CC
3 L 3905014 3905054
6 L 3905015 3905055