7
8. MAINTENANCE PROCEDURE
The pump has been designed and built as to require minimal maintenance
•
Periodically check the pipe joints to detect any leaks. Furthermore, always keep the pump clean to be able to quickly detect
any leaks or defects.
•
Check the suction at the bottom of the pump is clean after every 2000 hours of operation.
The product does not necessitate any special tool for operation and maintenance. When working with the pump it is
nonetheless recommended that personal health and safety equipment is used as is normal for any operation in an industrial or
similar workplace.
In case of doubts and/or problems that cannot be solved, do not try to discover the reason by disassembling machine parts, but
contact the DROPSA S.p.A technical office.
9. DISPOSAL
During maintenance or disposal of the machine care should be taken to properly dispose of environmentally sensitive items such
as oils or other lubricants. Refer to local regulations in force in your area. When disposing of this unit, it is important to ensure
that the identification label and all the other relative documents are also destroyed.
10. ORDERING INFORMATION
10.1 VERSIONS
DESCRIPTION
PART NUMBER
5kg Trolley pump
0400605
25kg Trolley pump
0400606
10.2. SPARE PARTS
DESCRIPTION
PART NUMBER
100:1 pneumatic pump
5kg version
0234714
25kg version
0234712
Lift cylinder
5kg version
3113178
25kg version
3113176
Follower plate
5kg version
1141638
25kg version
0234712
0-1000 bar Pressure gauge
3292078
0-10 bar Pressure gauge
3292170
Manifold valve
3096204
High pressure line 800 bar
0107056
Wheel
5kg version
1140171
25kg version
1140170
WARNING: Before carrying out any maintenance operation, ensure that power and pneumatic system are
disconnected.
