DOC-0171 Rev G-9
3 3
© 2017 DROPLET MEASUREMENT TECHNOLOGIES
Figure 23: Configuring Analog Input (AI) Channels in the SP2-D
4.
Click in the second blank field (the
Scaling
column) to reveal a drop-down list.
5.
Select
None (Volts)
.
6.
Highlight the number in the
Device
column and change it to “2.”
7.
Change the
Chan
column’s number to “24.”
8.
In the
Range
column, define the range as desired.
9.
Repeat steps 3 – 8 to enter information for any other desired analog input channels. In step
7, increment the channel number by one for each new channel. (Thus analog input 2 would
be number 25, analog input 3 would be 26, and so on.)
10.
Click the
Save Changes
button in the upper-right
11.
Click the green
Restart Program
button.
The analog input channels are now configured.
