DOC-0171 Rev G-9
1 7
© 2017 DROPLET MEASUREMENT TECHNOLOGIES
3.)
Start the SP2 software by double-clicking on the SP2 icon on desktop.
4.)
In the software, go to
Config
tab and
Program
sub-tab.
5.)
Check to ensure
Config File Being Viewed
is set to the correct config file. See Figure 9 for
the location of
this parameter. The name of the config file may vary depending on your
instrument. If the correct file is loaded, skip to step 10.
Figure 9: Verifying the Config File on the Config Tab
6.)
If a different file is listed, press the
Load a File
button (Figure 10). Navigate to the directory
C:\DMT\SP2 Support
. Select the correct file and click on OK.
