11
System Setup
Unpack equipment. Connect bypass valve, connectors. Attach components by pushing the
adapters together and tightening the nuts by hand until they feel snug. Position system on
a hard level surface with access to inlet plumbing, drain and electrical outlet.
Bypass Valve
Connectors
NOTE: Make sure
bypass valve is in
bypass mode.
Turn off main water supply and open nearest cold faucet to relieve pressure. Cut water supply
line, and connect plumbing to the inlet and outlet accordingly.
Note: Inlet and outlet connections are 1” NPT.
Additional piping and / or fittings may be necessary
Outlet
Inlet
NOTE: When using a sweat adapter,
be sure not to solder plumbing with
adapter attached to equipment to
prevent damage to the plastic.
Turn Handles for
Bypass Mode
INSTALLATION INSTRUCTIONS
