Drolet DF01000, Инструкция по установке и эксплуатации

Страница: 32 / 69

Heatmax Furnace Installation and Operation Manual
32
PART B - INSTALLATION
6 Safety information
6.1 Summary of installation cautions and warnings
•
THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE
APPLIANCE ALWAYS OVERRIDES THE INFORMATION PUBLISHED, IN ANY
OTHER MEDIA (OWNER’S MANUAL, CATALOGUES, FLYERS, MAGAZINES
AND/OR WEB SITES).
•
MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR
MODIFYING COMPONENTS MAY RESULT IN HAZARDOUS CONDTIONS. WHERE
ANY SUCH CHANGES ARE PLANNED, FURNACE BUILDER INTERNATIONAL
INC. SHOULD BE CONTACTED IN ADVANCE.
•
ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN
WRITING BY THE TESTING AUTHORITY VIOLATES CSA B365 (CANADA), AND
NFPA 90B (USA).
•
CONNECT THIS FURNACE ONLY TO A LISTED UL 103 HT OR ULC S629
FACTORY-BUILT CHIMNEY FOR USE WITH SOLID FUEL OR TO A LINED
MASONRY CHIMNEY CONFORMING TO NATIONAL AND LOCAL BUILDING
CODES.
•
IF REQUIRED, A SUPPLY OF COMBUSTION AIR SHALL BE PROVIDED TO THE
ROOM OR SPACE.
•
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER
APPLIANCE.
•
DO NOT INSTALL IN A MOBILE HOME
6.2 Regulations covering furnace installation
WARNING
RESPECT THE LOCAL CODES (WHEN IN DOUBT, CONSULT YOUR LOCAL
DEALER).
Before installation, please read the instructions carefully and make sure you
understand them:
Installation must be made in accordance with the CSA B365 « Installation code for solid-
fuel-burning appliances and equipment » standard in Canada and NFPA 90B « Standard
for the installation of warm air heating and air conditioning system » in the United States.
Moreover, for all electrical connection, the Canadian standard CSA C22.1 « Canadian
electrical code » and in the United-States NFPA 70 standard « National Electrical Code »
must be followed.