Page 29
Installation and Operation Requirements - Deco Alto
ENGLISH
Figure 15: Removing the split pin
Figure 16: Installing the split pin
7.3.2 Door Alignment
To align, open the door and loosen the pressures screws located on the lower and upper hinges
of the door using a 3/32” Allen key to free the adjustable hinge rods.
Using a flat screwdriver, turn the adjustable hinge rods in the direction shown to adjust the
doors. Tighten all door hinge pressure screws when they are at the desired positions.
Configurations 1-2-3-4-5-6, show in which direction these act on the adjustment of the door.
3/32"
3
2
A
B
1
4
4
2
A
B
1
3
5
6
