background image

Page 3

Installation and Operation Manual - Escape 1800

We want to congratulate you 
on your purchase and wish 
to help you get maximum 
satisfaction from your wood 
fire.  In the pages that follow, 
we will give you advice on 
wood heating and controlled 
combustion as well as 
technical specifications 
regarding installation, 
operation and maintenance of 
the model you have chosen.

The instructions pertaining to 
the installation of your wood 
fire comply with AS/NZS 
4012/4013 (2014) and AS/NZS 
2918:2001 standards.

Please read this entire manual 
before you install and use your 
new wood fire. Failure to follow 
instructions may result in 
property damage, bodily injury, 
or even death. It is important 
that you follow the installations 
guidelines exactly. 

Consult your local city, 
borough or shire council about 
restrictions and installations 
requirements in your area and 
the need to obtain a permit.

KEEP THIS INSTRUCTION 
MANUAL FOR FUTURE 
REFERENCE.

THANK YOU FOR CHOOSING 
THIS WOOD FIRE.

If this wood fire is not 
installed properly, heat 
sensitive materials 
near it may overheat 
and catch fire.

 

 

To reduce the 
risk of fire, follow 
the installation 
instructions in this 
manual. 

Dealer:

Installer:

Phone Number:

Serial Number:

Содержание DB03104





















































Отзывы: