Drolet DB03104 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 52

Drolet DB03104 Скачать руководство пользователя страница 29

Page 29

Installation and Operation Manual - Escape 1800

6.2 Regulations Covering Wood fire Installation

• IT IS RECOMMENDED THAT THE INSTALLATION OF YOUR DROLET WOOD FIRE BE

CARRIED OUT BY A QUALIFIED SPECIALIST INSTALLER. IF ANY ELECTRICAL WORK IS
REQUIRED, IT MUST BE CARRIED OUT BY A LICENSED ELECTRICIAN.

• WARNING: The instructions pertaining to the installation of your wood fire comply with the

AS/NZS 2918:2001 standard. THE APPLIANCE AND FLUE SYSTEM SHALL BE INSTALLED
IN ACCORDANCE WITH AS/NZS 2918:2001 AND THE APPROPRIATE REQUIREMENTS OF
THE RELEVANT BUILDING CODE OR CODES.

• WARNING: APPLIANCES INSTALLED IN ACCORDANCE WITH THIS STANDARD SHALL

COMPLY WITH THE REQUIREMENTS OF AS/NZS 4012/4013 (2014) WHERE REQUIRED
BY THE REGULATORY AUTHORITY, I.E. THE APPLIANCE SHALL BE IDENTIFIABLE BY A
COMPLIANCE PLATE WITH THE MARKING “TESTED TO AS/NZS 4012/4013 (2014)”.

• ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING

BY THE TESTING AUTHORITY IS CONSIDERED TO BE IN BREACH OF THE APPROVAL
GRANTED FOR COMPLIANCE WITH AS/NZS 4012/4013 (2014).

«
...
27
28
29
30
31
...
»

Содержание DB03104





















































Отзывы:

Нет отзывов