DriveTest FM100BT, Руководство пользователя

Страница: 46 / 47

Schließkraftmessgerät FM100BT
Version 1.7 Seite 46/47
7.2 Glossary
The following glossary should serve as disambiguation and description of
terms used in this manual.
Term Meaning/ usage
Accuracy
Degree to which the result of
measurement conforms to the correct
value
Gap width Also referred to as: opening width
Guideline
Referred to a set of parameters and limit
values that define the execution of
measurements and the way the results are
tested; basis of guidelines are standards
Limits Maximum permitted quantity
Pinch force
F
E
, mean value of effective forces,
measured sequentially at the same
measuring point (also referred to as:
closing force/ clamping force)
Spacers
Distance piece for realising different gap
width
Spring stiffness
Necessary force to compress/ pull a spring
a certain amount; here Newton per mm
(also referred to as: deflection rate for a
spring)
Standard
General term for a directive for measuring
and evaluating the pinch force, these can
be laws, European standards etc.