This document and the information contained herein, is the exclusive property of Drivecon and represents a non-public, confidential and proprietary trade secret that may not be
reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Drivecon.
Copyright © (2015) Drivecon. All rights reserved.
(26)
When improperly disposed, batteries may short circuit, causing them to become hot, burst or ignite.
Store in a cool location. Keep batteries away from direct sunlight, high temperature, and high humidity.
Do not throw batteries into fire.
BATTERY CHARGING PWRLynk-TX8R & PWRLynk-TX12
1. When approximately 10% of the battery capacity remains, the top LED lights (red).
2. Put the charger plug into the socket in the back of the transmitter.
While charging, the top LED flashes (red).
If the transmitter has an external battery, you can also remove the battery and charge it in the SV DC
charging unit.
3. When fully charged, the top LED lights green.
4. Remove the charger plug.
ON/OFF SWITCH
The PWRLynk-TX8R transmitter has an on/off switch on the backside. The switch breaks the power
supply from the battery. When in position 0/off, the transmitter cannot be started unless you connect the
charger plug. When the transmitter is transported by airplane, the on/off switch must be in 0/off position.
The switch should not be used as an on/off button for the transmitter. To turn the transmitter off, use the
stop button.
MAINTENANCE
Repairs and maintenance must be carried out by qualified personnel
Use spare parts from Tele Radio AB only
Contact your representative if you require service or other assistance
Keep the product in a dry, clean place
Keep contacts and antennas clean
Wipe off dust using a slightly damp, clean cloth
IMPORTANT! Never use cleaning solutions or high-pressure water.
