Drive U-drive IFU, Руководство пользователя

Страница: 5 / 16

U-Drive IFU Page 4 Issued 10/11
2.
Bracket Installation
Install both brackets at the front of the
horizontal tube of the wheelchair frame,
ensuring the white nylon part is pointing
towards the rear of the chair (as shown by
the photo above).
When installing the brackets:
a. Ensure the white nylon section of the
brackets are inside the wheelchair frame
and point towards the rear of the frame
b. Ensure the brackets do not interfere with
the front castor wheels. Test this by
swivelling the castor forks and checking
all parts are clear of the brackets.
c. Ensure that the brackets are positioned
exactly opposite each other so the U-
Drive mounting bar is straight and easy to
push in to the bracket. If required, use
the measuring bar to check the brackets
are correctly positioned before securing
on the tubing.
3.
U-Drive Unit Installation
Position the U-Drive unit behind the
wheelchair and ensure that the motors are
in the DRIVE position. Operate the lever
marked
“Press or Pull” and push down the
yellow handle on the other lever to retract
the round pegs on the horizontal bar on the
front of the unit (as shown below).
Pull back the wheelchair and position so that
the mounting bar slides in to the brackets on
the wheelchair frame (as shown below).