Drive U-drive IFU, Руководство пользователя

Страница: 6 / 16

U-Drive IFU Page 5 Issued 10/11
Operate the lever marked “Press or Pull” (as
shown below). The yellow handle will
automatically rise and the unit should now
be locked in position.
Plug the lead from the joystick in to the U-
Drive as shown below. If required, secure
the joystick cable to the wheelchair using
cable ties.
Loop the strap over the push handle and
adjust so that it is taught, as shown below.
(The strap is used to prevent the U-Drive
from dropping in to pot holes, etc)
4.
Battery Pack Installation
To install, slot the battery pack in to the
receiver on the U-Drive and the pack will
automatically lock in to place.
Disassembly and Transportation
The disassembly procedure is essentially the
assembly procedure in reverse.
1. Remove the battery pack by lifting the
pack up by the handle whilst pressing the
grey button marked PRESS.
2. Unloop the strap from the push handle.
3. Pull out the joystick connector from the
U-Drive.
4. Operate the PUSH or PULL lever and
press the yellow handle down.
5. Push the wheelchair away from the U-
Drive.
The wheelchair can now be folded. The U-Drive
can be lifted using the handle at the front and
the chassis at the rear.