Cirrus Powerchair Owners Handbook
Page 9 of 24
Doc Code: PCC_IFU (02/15)
5.
Speed / Profile Indicator.
This shows the maximum speed of the
wheelchair. The more LEDs are lit, the faster the maximum speed.
The wheelchair can be configured to use drive profiles. However,
this is not included by default. For more information about drive
profiles, contact your dealer. If the speed indicator ripples, this
means the wheelchair is locked. By default the locking function is
disabled.
To unlock / lock the wheelchair:
Switch the wheelchair on
Hold down the on/off button for 1 second (lock only)
Deflect the joystick forwards until the control system bleeps
Deflect the joystick backwards until the control system bleeps
Release the joystick. There will be a long bleep and the
wheelchair will be unlocked / locked.
6.
Horn
. Press this button to sound the horn. The horn will stop when
you release the button.
7.
Battery Gauge.
This shows the battery power level of the
wheelchair.
The more LEDs that are lit, the more power is left in the battery.
The LEDs will be lit constantly when the wheelchair is operating
normally.
If the LEDs on the battery gauge are stepping up (i.e. the number
of LEDs lit quickly increases then resets to 1), the battery charger
is connected and the wheelchair drive inhibited.
If the battery gauge is flashing slowly then the wheelchair is
operating normally, but the batteries need recharging as soon as
possible.
If the battery gauge LEDs are flashing rapidly this indicates a fault
with the wheelchair. If you have a problem with your wheelchair
consult the table overleaf. If the problem persists after you have
followed the advice overleaf then restarted the wheelchair, contact
