5
DANGER SHOCK HAZARD (15005LP & 15004P - Electric Beds Only)
• DO NOT plug anything into the control box of bed (i.e. pendants and actuators) while mains cable (power cord) is
plugged into the wall outlet.
• Any cords or tubing used on or with this bed MUST be routed and secured properly to ensure that they do NOT
become entangled, kinked or severed during normal operation of the bed.
• DO NOT roll the bed over any power or pendant cords.
• DO NOT open any actuators, control boxes, or pendants. Service and repair must only to be performed by authorized
service personnel. If unauthorized service is performed on any components the warranty is void.
• Inappropriate handling of power supply cords can create a shock hazard.
• When routing cables from other equipment in the medical bed, precautions shall be taken to avoid squeezing those
between parts of the medical bed.
• DO NOT allow the cord, electrical outlets, and electrical control box or hand pendant to become wet or submerged.
• DO NOT operate the bed if any electrical component such as the power cord, electrical outlet, connections, motor/
actuator or mechanical component has malfunctioned or has been damaged in any way.
• The bed MUST be connected to an appropriate power source. Mains cable and proper function must be checked
regularly.
• Possible injury or Death may occur due to pendant cord being a source for entangling patient/resident. Patients/
residents with decreased mental acuity should NOT have access to pendant.
FIRE HAZARD (15005LP & 15004P - Electric Beds Only)
• DO NOT use near open flame or explosive gases.
• Possible Fire Hazard if used with nasal mask in 1/2 bed tent 02 administering equipment. If 02 tent is being used it
should not fall below the mattress deck. The pendant should not be placed in an oxygen enriched environment such
as an 02 tent.
• This bed should not be placed in an oxygen enriched environment.
CAUTION
• These medical beds are not intended to work with patient lifts other than those specified by Drive DeVilbiss
Healthcare as being compatible.
• Do NOT use side rails as handles for moving the bed.
• Keep all moving parts, including the mattress deck (sleep surface), main frame, all drive actuators and moving
components free of obstructions.
• Ensure that the individual using this bed is properly positioned, particularly when the bed is being operated.
• Body weight should be evenly distributed over the sleeping surface of the bed. Avoid situations where entire body
weight is on a raised head or foot surface. This includes while assisting the resident in repositioning or transferring in
or out of bed.
• Supervision is required when this product is operated by or near children or people with disabilities.
• Do not modify this bed without authorization of the manufacturer. If unauthorized service is performed on any
components the warranty is void.
!
Содержание 15003P
Страница 5: ...3 WARNING LABELS...
