48
RTS HUMIDIFIER RX SERIES INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
Supply water
RO
DI
Softened
Potable
Grains hardness ________________________________
Water pressure ________________ psi
(must be between 25 and 80 psi
[172 and 582 kPa] at 6.0 gpm)
Supply water piping is 3/4" (DN20) pipe thread or up
sized for longer runs to maintain 25-80 psi at 6.0 gpm.
______________________________________________________
Wiring
Control transmitter
Gauge _________
Shield
High limit duct humidistat
Gauge _________
Shield
Airflow proving switch
External fault contact
Twisted pair connection between boards
(for multiple units only)
Job site representation:
________________________________________________________
________________________________________________________
________________________________________________________
Job name _______________________________________________
Program code ___________________________________________
DriSteem rep ____________________________________________
Required clearances (see page 14 and 20)
Steam pipe
Outlet size
________________________________
Flange
Hard pipe
Insulated
Steam hose (do not insulate)
Rise ________________________________
Run ________________________________
Pitched back to humidifier
45° angles used in piping
OPERATION
Start-up commissioning checklist
Important:
Troubleshooting information for this humidifier is
located in the
Vapor-logic Installation and Operation Manual
shipped
with your humidifier. If you do not have this manual, go to
www.dristeem.com to download or order a copy.
Visit date _______________________________________________
Model # ________________________________________________
Serial # _________________________________________________
Tag # ___________________________________________________
Continued