Drinkpod DPWPA600FS B, Инструкция по использованию и уходу

Страница: 18 / 22

Troubleshooting Your DRINKPOD
Troubleshooting Your DRINKPOD 5-2
Issue #3: My DRINKPOD 6 isn’t powering on.
Solution 1: Check to make sure GFI (red and black buttons on certain electrical outlets)
has not been tripped. If it has, reset it. If it trips again, you have a short somewhere. We
highly recommend calling a professional electrician.
Solution 2: Check your electrical circuit breaker.
Solution 3:
Test your electrical outlet with another device.
Solution 4: Contact support at 1-844-374-6576 , or email us at support@drinkpod.
com .
Issue #4: My DRINKPOD 6’s Hot Mode won’t dispense.
Solution 1: Check water source line is turned on at source connection and water is flowing
into the of DRINKPOD.
Issue #5: My DRINKPOD 6’s Hot Mode isn’t hot.
Please note, this appliance is heating system is preset to a temperature range of
172°F - 194°F. This temperature is not adjustable.
Solution 1: Flip
T
Heating System Power Switch up to “ON” / “I” position at rear of
the appliance.
Solution 2: Hot tank’s water level may have been drained and exhausted by above
average use, and requires sufficient time to replenish.
Issue #6:
My DRINKPOD 6’s Cold Mode isn’t cold.
Please note, this appliance is cooling system is preset to a temperature range of
35.6°F - 46.4°F. This temperature is not adjustable.
Solution 1:
Flip
U
Cooling System Power Switch
up to “ON” / “I” position at rear of
the appliance.
Solution 2: Cold tank’s water level may have been drained and exhausted by above
average use, and requires sufficient time to replenish.
Solution 3: Compressor may have failed or lost the R-134A refrigerant. If compressor