Drinkpod DPWPA600FS B, Инструкция по использованию и уходу

Страница: 11 / 22

Using Your DRINKPOD 3-1
Using Your DRINKPOD
This guide will explain how to use, maintain, and troubleshoot your new DRINKPOD 6.
Be sure to complete all of the applicable instructions in the Installation Guide,
included with your DRINKPOD prior to using the appliance.
Powering On/Off Your Drinkpod
Be sure to never plug in your Drinkpod, or power on either temperature mode
before you’ve connected a proper water source, and enabled water flow.
1. To power on your DRINKPOD 6, simply plug in
H
110 Volt Power Cable into a 110
volt electrical outlet. To power off, unplug the appliance.
2. To power on the cooling system , flip the green
T
Heating System Power Switch
(on the left) up, into the on position. To power off, flip back down.
3. To power on the
heating system
, flip the red
U
Cooling System Power Switch
(right) up, into the on position. To power off, flip back down.
Dispensing Water
When first using your Drinkpod (or any time after it has been drained), it is first
necessary to allow time for the inner tanks to completely fill.
1. To dispense cold water, simply press in the
C
Cold Dispense Paddle
with the cup or
container you wish to fill.
2. To dispense hot water, first press in and hold the red
B
Child Safety Lock, then, press the
A
Hot Dispense Paddle
in with the cup or container you wish to fill against.