User manual
ELECTRIC IN BUILT OVEN | USA 76
35
3.
Appears "2:00 3:00 3:30" on the screen.
Four.
Use the numeric keypad to select the level of cleanliness.
5.
If you want to delay starting the self-cleaning cycle, press DELAY START
(Delayed Start), then schedule a time using the numeric keypad.
6.
Press START (Start).
After the door is closed, "SELF CLEAN" (Auto cleaning) or "CLEAN LOWER" (less
clear) appears in the text area of the selected oven until the end of the cleaning
cycle.
WHEN YOU'RE SELF-CLEANING CYCLE:
You will see "COMPLETE" (Full) on the screen and the oven door is unlocked.
7.
Once the furnace has cooled completely, remove ash with a damp cloth.
NOTE:
To avoid glass breakage, not to apply a wet, cold inside glass furnace before
it has cooled completely.
REMOVING THE OVEN DOOR
For normal use of oven it is not necessary to remove the oven door. However, if you
need to remove the door, follow the instructions in this section.
IMPORTANT:
•
Make sure the oven is cool and has been off the power before removing door.
•
Grasp the oven door only on the sides. Do not use the handle as you could rotate
your hand and cause damage or injury.
•
The oven door is heavy and fragile. Use both hands to remove the oven door.
•
The front door is glass. Handle it carefully to avoid breakage.
To remove the door:
1.
Open the door.
2.
Lift the locking hinge on each side.
3.
Hold the oven door firmly and close it completely.
Four.
Take both sides, lift the oven door while pushing to close and pull out the door
frame.
5.
Place the door in a safe place.
To replace the door:
Содержание USA 76
Страница 1: ...User Manual USA 76 Voltage220V 240V ...
