Dresser Wayne HyperPIB Series, Руководство по установке

Страница: 13 / 18

Installation
2-7
April 2003 Part No. 917404-001 Rev. B
2.4.2.2 Connectors
Table 2-1 HyperPIB Connectors
Connector Destination
J1 Primary AC
J2 Secondary AC
J6 Debug Monitor
2.4.2.3 LEDs
Table 2-2 HyperPIB LEDs
LED Function
CR11 Receiving data from Secondary AC
CR12 Receiving data from Primary AC
CR13 Pump link B active
CR14 Pump link A active
CR15 Console active
2.4.2.4 Pin Definitions
Table 2-3 RS-232 (DB-25) Pin Definitions
PIN Number Signal Direction Definition
1 <——> FG - Frame Ground
2 ——> TX - Transmit
3 <—— RX - Receive
4 ——> RTS - Request To Send
5 <—— CTS - Clear To Send
7 <——> SG - Signal Ground
8 <—— CD - Carrier Detect
20 ——> DTR - Data Terminal Ready
2.4.3 HyperPIB Board And RS-232 Cable Installation
To install the HyperPIB board perform the following steps.