Dresser Wayne HyperPIB Series, Руководство по установке

Страница: 10 / 18

Installation
2-4
April 2003 Part No. 917404-001 Rev. B
2.3 Returning Damaged Components
Parts or components returned to the factory under warranty or for repair are subject to damage if not
packaged properly. Complete the following steps to return parts or components to the factory.
1. Place electronic components in an anti-static bag and in the original shipping cartons for return
shipment to the factory.
NOTE:
If original shipping cartons are not available use a sturdy cardboard container and suitable
packing materials such as anti-static polyethylene foam or bubble pack, to ensure the component is
firmly packed.
2. Include a Return Parts Tag with the defective component describing the particular problem with
the part.
3. Make sure that adequate insurance is provided when returning parts to the factory.
WARNING:
If the parts or components arrive at our factory in a damaged condition and it is
determined that the damage is a direct result of inadequate or improper packaging, the damage will
not be covered under the original warranty and the customer or distributor will be held responsible for
the cost of repairs necessary to correct or replace the damaged parts.
2.4 HyperPIB Installation
2.4.1 Required Equipment
Verify the following items are available before attempting to install the HyperPIB.