Rev.1.1
Page 5
bracket
and place the bracket on the
Return glass
at a proper position. Adjust the position
of the wall bracket on the wall to ensure that the bar is leveled and parallel to the
Glass
door
. When the bar is aligned in place, outline the position for the
Wall bracket
. Remove
the
Wall bracket
, mark the screw hole and drill it, insert the
Wall anchor (19).
Attach the
Wall bracket
to the wall with the
Screw ST4.2×30 (26)
. Insert the end of the support bar
into the
Wall bracket
and attach the other end to the
Glass bracket
. Tighten up the
set-screw on the glass bracket. (
Do not forget to put the plastic gasket between the
glass and metal.
) Gently push the return glass from outside and check if the door is closing
tightly and then tighten up the holding set-screws on the
Wall bracket
. See fig. 14 for
details.
15. Seal with silicone between the shower tray and the stationary glass, between the wall and
the wall profiles. See fig. 15 for details.
If you want your shower enclosure to be installed in a different configuration, you can
simply switch the positions of wall profile 1 and wall profile 2.
Fig. 1 Fig. 2
Содержание TETRA
Страница 6: ...Rev 1 1 Page 6 Fig 3 Fig 4 Fig 5 Fig 6 ...
Страница 7: ...Rev 1 1 Page 7 Fig 7 Fig 8 Fig 9 Fig 10 ...
Страница 8: ...Rev 1 1 Page 8 Fig 11 Fig 12 Fig 13 Fig 14 ...
