© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
Tools
Tip:
Measure the finished opening before
proceeding with the installation to be sure
that the correct model size has been ordered.
(see the Shower Enclosure Plan on page 3)
Tip:
Prior to installation, cover the
shower/tub drain with tape to prevent
losing screws or small parts.
NOTE:
Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed
diagram and packing list in this manual as a reference. Before discarding the carton, check for small
hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,
please contact DreamLine
®
for replacement. The shipping boxes may contain extra parts not used in
your model configuration.
NOTE:
Retain these installation instructions for future reference.
Tip:
Set screw gun clutch to low setting
when installing screws and bolts to
prevent stripping the heads.
5
FLEX Shower Enclosure Panel manual Ver 3 Rev 4 072019
©2019 DreamLine. All Rights Reserved
Ø=1/8"
(3mm)
Drill bit
Ø5/16"
(8mm)
Drill bit
Drill
Power
Hammer
Silicone
Razor Knife
W
Top
Middle
Bottom
Level
Tape
Measure
Pencil
Screwdriver
Phillips
!
Threshold must be level.
