FLEX Shower Door Manual Ver 2 Rev 8 01/2018
© 2018 DreamLine. All Rights Reserved
8
NOTE:
Flip the entire assembly for opposite installation.
3.
Move the Door assembly (02) with the
Wall profiles (01) onto the Shower base
with the Stationary glass side tight to the
wall. Adjust the Door assembly (02) by
stretching the top and bottom Expanding
rails evenly to extend the Door assembly
(02) tight to the opposite wall. If the top
and bottom wall opening measurements
are different or if the walls are out-of-
plumb, make adjustments by slightly
pulling the Wall profiles (01) out of the
Door assembly (02).
NOTICE:
The maximum adjustment width of the
Expanding rails is 3”. The wall profiles
allow for 1/2” adjustment for each side.
See Fig. 4 for details.
Fig
. 3
1
2
Fig
. 4
