“ENIGMA Z” Enclosure Rev.1 Ver.1 05/2013
9
8.
Your
Upper
Guide rail (03)
has been precut for
your Shower model opening width:
48”
or
60”
for shower width.
If
W-
width of your opening between finished wall
and the internal side of the
Return Panel (22)
is
equal to the size of your Shower model, it is
unnecessary to cut the
Upper
Guide rail
and you
can continue to Step 9.
If
W-
width of your opening between finished wall
and the internal side of the
Return Panel (22)
is
less than the size of your Shower model,
you will
need to cut the
Upper
Guide rail
from the end
which is farther from the
Glass brackets (07)
holes.
The length to cut off will be
L:
L=
Subtract
W
from the size of your Shower
model.
Fig.
9
See Fig. 9 for details.
9.
Install the
Upper guide rail (03)
to the
Stationary glass
(02)
with
the
Glass brackets (07)
and tighten the set
screws.
Slide the
Door stoppers (01)
on each end of the
Upper
guide rail
and secure them temporarily.
Slide the
Guide Rail brackets (08)
on each end of the
Upper guide rail
and temporarily secure them as well.
Assemble the
Wall Bracket (19)
to the bottom corner of
the
Stationary glass (02).
See Fig. 10 and Fig. 11 for details.
Fig.
10
3
1
2
4
5
6
L
FOR EXAMPLE:
If your wall-to-glass panel opening
W=58”.
Your shower model is
60”.
L=60”-58”=2”,
You have to cut
2”
off from
the rail.
