17
EN
FAQ
Error
Possible Cause
Solution
The vacuum
GRHVQRWZRUN
The handle assembly has not
been installed in place.
Reinstall the handle
assembly.
The vacuum is out of battery or
ORZRQSRZHU
Fully charge the vacuum,
then continue to use it.
The vacuum is upright.
Recline the vacuum.
The roller brush has not been
installed in place, or the roller
brush is stuck.
Reinstall or clean the roller
brush.
7KHGLUW\ZDWHUWDQNKDVQRW
been installed in place.
5HLQVWDOOWKHGLUW\ZDWHU
tank.
7KHGLUW\ZDWHUWDQNLVIXOO
(PSW\WKHGLUW\ZDWHUWDQN
Weak suction
force.
7KHŀOWHULVFORJJHG
&OHDQWKHŀOWHU
7KHUROOHUEUXVKFRYHUŀOWHU
DQGFOHDQZDWHUWDQNKDYHQRW
been installed in place.
Make sure the parts have
been installed in place
before use.
The roller brush is entangled
by hairs.
Refer to the maintenance
manual [Clean the Roller
Brush] section.
There are some foreign objects
in the tube or the tube is
blocked.
Clean the tube.
The motor
is making a
strange noise.
7RRPXFKGLUW\ZDWHULQWKH
GLUW\ZDWHUWDQN
(PSW\WKHGLUW\ZDWHUWDQN
The main suction opening is
blocked.
Clear any blockage in the
main suction opening.
The battery
status indicator
does not light up
ZKLOHFKDUJLQJ
7KHSRZHUDGDSWHULVQRW
plugged into the electrical
outlet.
0DNHVXUHWKHSRZHU
adapter is plugged in
properly.
7KHSRZHUDGDSWHULVQRW
connected to the charging
base properly.
Make sure they are
connected properly.
