Dream Vision DreamScaler4, Руководство пользователя

Страница: 7 / 40

2.0 GETTING STARTED
R699761 - DreamScaler 4 User Manual 7
• HD-SDI 1 and 2 (SD 480i@60Hz and 576i@50Hz YCbCr 4:2:2, HD 1080p50Hz and 1080p60Hz YCbCr 4:2:2)
Video Outputs
The DreamScaler 4 has two video outputs, one analog and one digital. The default signal output is by 1080p.
The analog output on the DreamScaler 4 can output the following signal from any resolutions up to 1920 x 1080:
• YPbPr (Component)
• RGBHV
• RGsB
• RGBS
The HDMI output on the DreamScaler 4 can output any resolutions up to 1920 x 1080 @ 60Hz: (1080p24 included)
• RGB 4:4:4 (8-bit)
• YCbCr 4:2:2 (10-bit)
• YCbCr 4:4:4 (8-bit)
To connect the DreamScaler 4 to a display that has a DVI input, use either an HDMI-to-DVI cable or an adapter.
Audio Inputs
There are nine (9) audio inputs on the DreamScaler 4:
• Two (2) Optical Digital inputs
• Two (2) Coaxial Digital inputs
• One (1) Analog (L/R) input
• Four (4) HDMI inputs
While the digital and analog audio inputs can be assigned to any one of the video inputs, the HDMI audio inputs are
tied directly to the HDMI video signal connected on the same input.
The DreamScaler 4 accepts digital audio sourced from DVD players, satellite receivers, digital set top boxes, game
consoles, or other digital audio devices. These inputs are compatible with most consumer digital audio formats,
including CD-Audio (44.1kHz/16 bit LPCM), Dolby Digital, and DTS.
The coaxial digital audio inputs are compatible with any format with a sampling frequency between 24kHz and
192kHz, and with a data word structure up to 24 bits in length. The optical digital audio inputs are compatible with
any format with a sampling frequency between 24kHz and 96kHz and with a data word structure up to 24 bits in
length. The HDMI audio inputs are compatible with HDMI 1.3 audio formats.
Audio Outputs
There are two digital audio outputs, one coaxial and one optical. Both are active at the same time, with the selected
input Digital Audio stream.
12V Triggers Outputs
There are two 12V Trigger outputs that are designed to support a total combined load of 500 mA.
Power Supply Input
The DreamScaler 4 comes with a 6V@7A AC-to-DC converter power supply, which accepts 100-240 VAC at 50/
60Hz. To attach power to the unit:
Note:
The DreamScaler 4 is able to process HDCP protected signals. However, the output signal may be only visible if a
valid HDCP supported display is hooked up to the DreamScaler 4’s HDMI output connector. The output signal would
never be visible through the DreamScaler 4’s analog BNC output connectors.
Use only the power supply that came with your DreamScaler 4.